# Missing or Late Statistical Key Figures Check Report

> A custom ALV report that checks, per cost center, whether the statistical key figures used as keys in assessment and distribution cycles (headcount, square meters, kWh and so on) have been entered for this period and how much they changed against the previous period. Missing values are visible before the cycle runs.

- Type: Report, Custom development, ALV report
- Module: CO
- Estimated effort: S (2–3 working days)
- Last updated: 2026-11-17
- URL: https://nekuhub.com/en/reports/missing-statistical-key-figures-check-report/


## Why is the standard not enough?

KB33N displays statistical key figure documents one by one; it does not list which cost centers are missing a value this period. A missing headcount or square-meter value is only noticed after the assessment cycle has posted zero or a wrong allocation, and the cycle is then reversed and run again. A check list is needed before the close.

### Closest standard alternatives

- KB33N: Displays statistical key figure documents; does not list missing values.
- KSU5: Runs the assessment cycle; a missing key is only noticed in the cycle result.

## Tables used

| Table | Role | Access | Join | System |
|---|---|---|---|---|
| COSR | Statistical key figure period values per cost center (driving table) | Read | - | ECC + S/4 |
| TKA03 | Key figure unit and category (fixed/totals) | Read | TKA03-KOKRS = P_KOKRS AND TKA03-STAGR = COSR-STAGR | ECC + S/4 |
| CSKS | Valid cost centers, object number and owner | Read | CSKS-OBJNR = COSR-OBJNR AND CSKS-KOKRS = P_KOKRS | ECC + S/4 |
| CSKT | Cost center text | Read | CSKT-KOKRS = CSKS-KOKRS AND CSKT-KOSTL = CSKS-KOSTL AND CSKT-DATBI = CSKS-DATBI AND CSKT-SPRAS = SY-LANGU | ECC + S/4 |
| I_StatisticalKeyFigure | Statistical key figure master data on S/4HANA | Read | ControllingArea = P_KOKRS AND StatisticalKeyFigure = COSR-STAGR | S/4HANA only |

## Selection screen parameters

| Parameter | Description | Type | Reference field | Required |
|---|---|---|---|---|
| P_KOKRS | Controlling area | Single value | TKA03-KOKRS | Yes |
| S_STAGR | Statistical key figure | Range / multiple | COSR-STAGR | Yes |
| S_KOSTL | Cost center | Range / multiple | CSKS-KOSTL | No |
| P_GJAHR | Fiscal year | Single value | COSR-GJAHR | Yes |
| P_PERIO | Period | Single value | - | Yes |
| R_PREV | Reference: previous period | Radio button | - | No |
| R_PYEAR | Reference: same period last year | Radio button | - | No |
| P_DEV | Change threshold for a warning (%) | Single value | - | No |

## Output columns

| Column | Source |
|---|---|
| Cost center | CSKS-KOSTL |
| Cost center text | CSKT-KTEXT |
| Person responsible | CSKS-VERAK |
| Key figure | COSR-STAGR |
| Unit | TKA03-MSEHI |
| Category | TKA03-GRTYP |
| Reference value | Calculated: COSR-SMEnnn value of the reference period |
| Current value | Calculated: COSR-SMEnnn value of the report period |
| Change % | Calculated: (Current − reference) / reference × 100 |
| Status | Calculated: Missing, check (threshold exceeded) or OK |

## How does the report work?

1. The unit and category (GRTYP: 1 fixed value, 2 totals value) of the selected key figures are read from TKA03.
2. Cost centers valid in the report year are taken from CSKS (DATBI ≥ period end); the text is added from CSKT.
3. Actual values are read from COSR (WRTTP = 04, VERSN = 000): the report period value from the SMEnnn field; the reference value from the previous period or the same period last year (R_PREV / R_PYEAR).
4. For totals-type key figures a zero value this period means "missing"; for fixed-value ones the value carries forward to later periods, so "missing" is only flagged when nothing was ever entered.
5. Change % = (this period − reference) / reference × 100; rows above P_DEV are flagged as "check".

## Authorization objects

- K_CSKS: Authorization to display cost center data
- K_CCA: Cost center accounting transaction authorization

## Frequently asked questions

### Why are fixed-value and totals-type key figures checked differently?

A fixed-value entry stays valid for later periods, so an empty period does not mean it is missing. A totals-type key figure needs a new value every period.

### How are the key figures to check chosen?

The list of key figures is given on the selection screen. Optionally, the key figures used in the cycles can be read from the cycle definitions and selected automatically.

### Are key figures on internal orders checked too?

The default scope is cost centers. If key figures are posted to internal orders as well, order objects (AUFK) are added as an extra selection.

---
Let us build this report for your system: https://nekuhub.com/en/request-a-quote/?report=co-statistical-key-figures-check
